-
CROSSES
Equal Cross(Class 150)
Standard Housing Materials:
pipe: 1" to 8"(Sch. 40),10" to 12" (Sch. 30)
CS ASTM A106 Grade B
Also Available: 304/316 Stainless SteelStandard Flange Materials:
As per ASTM A105
Dimensions as per ANSI B 16.5 Class 150Standard Linear Material
PTFE as per ASTM D 4895
Lining and testing as per ASTM F1545-15aExterior Finish:
Standard: Two Layers of epoxy corrosion resistant primer
Special paint or blast profile can be applied for an
additional chargeSize (inch) Ordering Codes ØB (mm) H
(mm)S
(mm)Lining Material Housing
MaterialFlange Type vaccum Rating (in
Hg/°F)1" LPS-1014-1 48 89 3.3 PTFE Fabricated
SteelF FV/200 1.5" LPS-1014-1.5 69 102 3.8 2" LPS-1014-2 88 114 4.0 3" LSP-1014-3 118 140 4.0 4" LPS-1014-4 151 165 4.0 6" LPS-1014-6 204 203 7.0 8" LPS-1014-8 256 229 8.0 10" LPS-1014-10 312 279 8.0 12" LPS-1014-12 376 305 10.8 F - Fixed Fiange
For details on sizes 14" and above please contact DuFlon
5218 Rev 01 dt 17th Jan 2017
BACK TOLPS ANSI STANDARDS Short Stack Cross (Class 150)
Standard Housing Materials:
Dl Casted ASTM A395
Dimension as per ANSI B 16.5 Class 150Standard Liner Materials:
PFA as per ASTM D 3307
Lining and testing as per ASTM F1545-15aExterior Finish:
Standard: Two Layers of epoxy corrosion resistant primer
Special paint or blast profile can be applied for an additional
chargeSize (inch) Ordering Codes ØA
(mm)ØB
(mm)H
(mm)H1
(mm)s
(mm)Stack Bolt
Holes (inch)Run Bolt
Holes (inch)Lining Material Housing
Materialvaccum Rating (in
Hg/°C)1" LPS-1037-1 20.0 50.8 89 30.2 3.3 1/2*-BSW 5/8 PFA DI Casted FV/200 1.5" LPS-1037-1.5 33.3 73 102 37.1 3.8 1/2* -BSW 5/8 2" LPS-1037-2 44.4 92 114 42.9 4.1 5/8*-BSW 3/4 3" LPS-1037-3 69.8 127 140 55.6 4.1 5/8*-BSW 3/4 4" LPS-1037-4 94.2 157 165 68.3 4.1 5/8*-BSW 3/4 6" LPS-1037-6 140.1 216 203 93.7 7.1 3/4**-BSW 7/8 8" LPS-1037-8 185.0 264 229 125.5 7.9 3/4**-BSW 7/8 10" LPS-1037-10 235.5 319 279 152.4 7.9 7/8**-BSW 1 12" LPS-1037-12 279.2 379 305 178.6 9.9 7/8**-BSW 1 **4 holes closest to centerline are tapped, other bolt holes are bored smooth
*All bolts are tapped
BSW-British Standard Width
For details on sizes 14" and above please contact DuFlon
5235 Rev 00 dt 12th Jul 2016
BACK TOLPS ANSI STANDARDS